| Part Number | AIR-AP1815I-S-K9 |
| Integrated antennas | – 2.4 GHz, gain 2 dBi
– 5 GHz, gain 4 dBi |
| Interfaces | – 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE)
– Management console port (RJ-45) |
| Indicators | – Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors |
| Dimensions (W x L x H) | – Access point (without mounting bracket): 6 x 6 x 1.3 in (150.8 x 150.8 x 33 mm) |
| Weight | – Access point without mounting bracket or any other accessories: 14 oz (400 g) |
| Environmental | – Operating
◦ Temperature: 32° to 104°F (0° to 40°C) ◦ Humidity: 10% to 90% (noncondensing) ◦ Max. altitude: 9843 ft (3000 m) @ 40°C – Nonoperating (storage and transportation) ◦ Temperature: -22° to 158°F (-30° to 70°C) ◦ Humidity: 10% to 90% (noncondensing) ◦ Max. altitude: 15,000 ft (4500 m) @ 25°C |
| System | – 1 GB DRAM
– 256 MB flash – 710 MHz quad core |
| Powering options | – 802.3af/at Ethernet switch
– Optional Cisco power injectors (AIR-PWRINJ5=, AIR-PWRINJ6=) |
| Power draw | – 8.3W (maximum, on PoE) |
| Physical security | – Torx security screw, included with the access point |
| Accessories | – Mounting bracket: AIR-AP-BRACKET8= (available as spare)
– Physical security kit: AIR-SEC-50= (sold separately), with 50 pcs. Security screws used to secure access point onto wall-mounting bracket, 50 pcs. RJ-45 caps and 2 pcs. unlock keys used to block physical access to Ethernet ports |
| Compliance | – Safety: UL 60950-1, CAN/CSA-C22.2 No. 60950-1, UL 2043, IEC 60950-1, EN 60950-1
– Radio approvals: FCC Part 15.247, 15.407, RSS-247 (Canada), EN 300.328, EN 301.893 (Europe), ARIB-STD 66 (Japan), ARIB-STD T71 (Japan), EMI and susceptibility (Class B), FCC Part 15.107 and 15.109, ICES-003 (Canada), VCCI (Japan), EN 301.489-1 and -17 (Europe), EN 50385 – IEEE standards: IEEE 802.11a/b/g, 802.11n, 802.11h, 802.11d, IEEE 802.11ac – Security: 802.11i, WPA2, WPA, 802.1X, AES – Extensible Authentication Protocol (EAP) types: EAP-Transport Layer Security (TLS), EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2), Protected EAP (PEAP) v0 or EAP-MSCHAPv2, EAP-Flexible Authentication via Secure Tunneling (FAST), PEAP v1 or EAP-Generic Token Card (GTC), EAP-Subscriber Identity Module (SIM) – Multimedia: Wi-Fi Multimedia (WMM) – Other: FCC Bulletin OET-65C, RSS-102 |
| Authentication and security | – Advanced Encryption Standard (AES) for Wi-Fi Protected Access 2 (WPA2)
– 802.1X, RADIUS authentication, authorization and accounting (AAA) – 802.11r – 802.11i |
| Software | – Cisco Unified Wireless Network Software with AireOS Wireless Controllers Release 8.5 or later
– Cisco Mobility Express |
| Maximum clients | – Maximum number of associated wireless clients: 200 per Wi-Fi radio, in total 400 clients per access point |
| 802.11ac | – 2×2 single-user/multiuser MIMO with two spatial streams
– Maximal ratio combining (MRC) – 20-, 40-, and 80-MHz channels – PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz) – Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx) – 802.11 Dynamic Frequency Selection (DFS) – Cyclic shift diversity (CSD) support |
| Ethernet ports | – Authentication with 802.1X or MAC filtered
– Dynamic VLAN or per port – Traffic locally switched or tunneled back to wireless LAN controller |
Wireless Access Points Cisco AIR-AP1815I-S-K9
Liên hệ giá tốt
Hỗ trợ mua hàng:
028 399 70399 - 0908 301313
(Hỗ trợ dự án 24/7)
028 399 70399 - 0908 301313
(Hỗ trợ dự án 24/7)
Đánh giá
Chưa có đánh giá nào.
Sản phẩm tương tự
Liên hệ giá tốt
Liên hệ giá tốt
Liên hệ giá tốt
Liên hệ giá tốt
Liên hệ giá tốt
Liên hệ giá tốt
Liên hệ giá tốt
Liên hệ giá tốt
Liên hệ giá tốt
Liên hệ giá tốt
Hãy là người đầu tiên nhận xét “Wireless Access Points Cisco AIR-AP1815I-S-K9”